Q235b AL6005 Flat Roof Solar Mounting System Frameless Or Framed

Solar Panel Flat Roof Mounting System Solar Panel Roof Mounting Systems

For the cement roof, it is usually flat or with a small angle, around 1~2degree, and the common installation methods are ballast type and concrete foundation type. The owner does not allow drilling on the concrete flat roof, mainly because he is worried about the strength of the old building or does not want to change the waterproof performance of the roof. This is why the ballast type or concrete foundation installation is selected.

Since the ballast type is not connected with the roof by anchor, the side and back can be considered to add windproof, especially for the cement roof without parapet.

The main purpose of the concrete foundation is to ensure that the solar system remains intact even during the storm season. It ensures good installation without causing water leakage on the roof, and can also improve the efficiency of solar cell modules and reduce the shielding of the parapet from sunlight.

It seems to be the most natural way to install photovoltaic modules on the flat roof. Not only can the installation amount / area be maximized, but also the photovoltaic can be used as the roof ceiling to increase the space area. However, in fact, Installing Photovoltaic on flat roof does not mean that you should also set its inclination to 0 degrees. We need to consider many factors and avoid flat installation, including:

1.the flat components are easy to deposit ash, which may cause 10% or even 30% loss of power generation;

2.the cleaning is more inconvenient, and the water is not easy to flow out;

3.compared with inclined installation, the power generation will be reduced;

4.the investment return period will be longer;

5.it may not be possible to remove the accumulated ash by natural rainfall.

As a PV enterprise, Lipu Metal has been focusing on the R&D, production and sales of solar mounting system and PV frames. Due to Lipu Metal has a professional design and development team, so it has obtained nearly 17 domestic and foreign product patents so far. Professional production and QC team, which is strictly controlling the quality from raw materials to finished products accordance with the ISO9001 international quality system standards.

Lipu Metal can not only produce conventional PV mounting system products and accessories, but also can offer the design which will meet the customized needs. According to the situation of different projects, Lipu Metal will provide matched mounting system solutions. From the beginning of purchasing from Lipu Metal, customers can enjoy a series of supporting services, including field investigation, measurement & calculation, design, installation support and after-sales service.

Technical Data

Project reference