|
Product Details:
|
| Name: | Aluminum Solar Carport Structure | Material: | AL6005-T5 And A2-70 Bolts |
|---|---|---|---|
| Foundation: | Concrete Base | Applications: | Commercial Or Household |
| Place Of Origin: | Jiangsu, China | Certificate: | ISO 9001 |
| High Light: | AL6005 Solar Panel Carport,Framed Solar Panel Carport,aluminum residential solar parking canopy |
||
Aluminum Solar Carport Structure Solar Parking Lot Solar Photovoltaic System
Photovoltaic shed, as the name implies, is a combination of photovoltaic and shed roof, which is the simplest combination of photovoltaic and architecture. It can not only realize all the functions of the traditional shed, but also bring benefits to the owners. For the sake of beauty and anti-corrosion effect, sometimes customers will choose aluminum structural supports, especially for household type sheds.
Most of the photovoltaic sheds with aluminum profile structure are multi column structures. However, if the covering area does not need to be particularly large, a single column structure can also be designed. The distance between the lowest point of the inclined aluminum profile structure shed and the ground is more than 2.5 meters, and the installation angle is 5 degrees or 10 degrees.
The main advantages of aluminum profile structure photovoltaic shed are:
(1) Beautiful appearance and good anti-corrosion effect;
(2) No on-site welding and drilling;
(3) Large lifting equipment is not required for construction, which is easy to install;
But its main disadvantages are:
(1) The car shed is of all aluminum structure, and the aluminum profile of the car shed needs to be customized, with high cost;
(2) It is generally double column or n-type, W-type, and the door opening spacing is relatively limited after parking;
(3) The height and span of the shed are limited by the strength and length of the material, so there is no way to make a particularly large structure.
Technical Data
|
Product Name
|
Aluminum Solar Carport Structure
|
|||
| Application | Flat land | |||
|
Material
|
AL6005-T5 and A2-70 hardware | |||
|
Wind Load
|
60 M/S
|
|||
|
Snow Load
|
1.5 KN/M²
|
|||
|
Applicable Module
|
Framed or Frameless
|
|||
|
Module Orientation
|
Portrait or Landscape
|
|||
|
Standard
|
JISC8955:2017, GB50009-2012, GB50797-2012
|
|||
|
Dimensions
|
Customized
|
|||
|
Warranty
|
10 Years
|
|||
| Work life | 25 Years | |||
Project Photo Reference
About LP Solar
• Lipu Metal (Jiangyin) Co., Ltd was previously called Leapton Metal (Suzhou) Co., Ltd before;
• November 30th, 2018, Lipu Metal (Jiangyin) established, the factory was relocated from Suzhou to Jiangyin;
• The new factory covers an area of about 21,300 square meters;
• The annual capacity of 500MW for mounting system and 500MW for aluminum frames;
• Lipu Metal has obtained 17 product patents so far.
About Factory
| Raw material area | Material area | Cutting area | Producting area | Sampling area |
|
|
|
|
|
| Pre-install area | Wahouse 1 | Packing area | Finish W.H. 2 | Loading area |
|
|
|
|
|
Contact Person: Wang
Tel: 18961678589
Fax: 86-510-86539918
